Fenix BC30 V2

£99.95

In Stock
Product thumb
Fenix Fenix BC30 V2
£99.95
  • Length: 120 mm / 4.7” 
  • Width: 50.5 mm / 2.0”
  • Height: 31.8 mm / 1.3”
  • Weight: 154 g / 5.4 oz (excluding battery and mount)
  • Smart wireless control switch
  • Battery level indication and low voltage warning
  • Quick release bicycle mount, easy to assemble and disassemble
  • Reliable all-metal heat fin
  • Compatible with Fenix bicycle light helmet mount
  • Dual distance beam system
Product thumb
Fenix Fenix BC30 V2
£99.95

0 Reviews


Description

Seasonal gift set - for a limited time only the BC30 V2 comes with a free BC05R V2 rear bike light!

The Fenix BC30 V2 bike light has a maximum output of 2200 lumens from the 2 x Luminus SST-40-N5 LEDs and is powered by 2 x 18650 li-ion batteries. 

An upgrade of the original BC30, the version 2 is lighter, more compact, brighter, offers longer runtimes and has a wireless remote pressure switch to remove constrictions that were experienced with the older model. 

The BC30 V2 features a dual distance beam system and patented optical lens to provide both a long and short range beam for illumination where a standard bike light wouldn't be able to reach. 

The light comes with a quick release bike mount made from fiberglass and nylon, providing durability and strength. Alternatively, the BC30 V2 can be attached to your cycling helmet using the Fenix ALG-08 mount (available separately).

Brightness Levels:
Burst: 2200 lumens
High: 1500 lumens - 2.3 hrs runtime
Med: 600 lumens - 6 hrs runtime
Low: 200 lumens - 16 hrs runtime
Eco/EDC: 50 lumens - 50 hrs runtime

Plus Flash mode (600 or 50 lumens).

Maximum beam distance 187 meters, waterproof to IP67 and resistant to impacts up to 1 meter.

Operation
Bicycle Light

  • Press and hold the functional switch for 0.5 seconds to turn the light on and off.
  • When on, single click the functional switch to cycle through the brightness levels, in order EDC/Eco>Low>Med>High.
  • When on, double click the functional switch to enter Strobe mode. 

Wireless Remote Switch

  • Follow the instructions in the user manual to connect the remote switch to the light.
  • Once connected and the light on, single click the output selection switch to cycle through the brightness levels, in order EDC/Low>Low>Med>High.
  • When on, single click the burst button to enter Burst mode which will stay on for 30 seconds.


Includes: bicycle mount, CR1632 button battery, wireless switch, spare o-ring, bicycle mounting shim (1 x thin, 1 x thick).
**Please note, batteries are not included**

You may also like