Zebralight SC63W
Maximum output 1126 lumens. Powered by 1 x Flat Top IMR 18650 battery.
The Zebralight SC63W flashlight has a maximum output of 1126 lumens from the Cree XHP35 neutral white LED.
** This torch requires an unprotected flat top flat top IMR 18650 li-ion rechargeable battery that measures between 65 and 65.2 mm. Please note, a battery is not included **
The torch offers a range of brightness levels, with the lowest at 0.01 lumens and the highest at 1126. The SC63W offers three main brightness levels plus a beacon-strobe mode. Each main level can be programmed to one of two sub levels. The second sub level can then be further programmed to another brightness levels.
The SC63W has a basic operation function to access low, medium, high and beacon-strobe modes. To control the programming and configuration the torch offers an advanced operation.
Brightness Levels:
High: H1 1126 lumens - 2.2 hrs runtime or H2 580 lumens - 2.8 hrs runtime / 312 lumens - 4.3 hrs runtime / 139 lumens - 12 hrs runtime
Medium: M1 61 lumens - 33 hrs runtime or M2 28 lumens - 73 hrs runtime / 10 lumens - 8 days runtime
Low: L1 3.3 lumens - 18 days runtime or L2 0.37 lumens - 2.8 months runtime / 0.05 lumens - 5.1 months runtime / 0.01 lumens - 7.1 months runtime
Plus Beacon Strobe Mode: 0.2 Hz Beacon at Low / 0.2 Hz Beacon at H1 / 4 Hz Strobe at H1 / 19 Hz Strobe at H1)
Waterproof to IPX-7.
Includes: spare o-rings
- 80º Spill
- 12º Hot Spot
- Nominal CCT: 4500K
- Head Diameter: 0.96" / 24.5 mm
- Length: 3.64" / 92.5 mm
- Weight: 1.3 oz / 38 g (excluding battery)
- PID thermal regulated outputs (two highest output levels)
- Built in battery discharging protections with continuously monitored temperature, current, and voltage, plus a (2.7V) low voltage cutoff
- Battery capacity indicator
- Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
- Durable electronic soft-touch switch
- Smart user interface
- Precision machined unibody casing from premium grade aluminum bar stocks
- Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
- Durable natural hard anodized finish (Type III Class I)
- Sealed and potted LED driver circuitry
- Tempered optical grade glass
- Orange peel textured reflector
- Battery reverse polarity protection
- Pre-installed pocket clip