Zebralight SC63

Code: 846584012356

Maximum output 1300 lumens. Powered by 1 x Flat Top IMR 18650 battery.

The Zebralight SC63 torch has a maximum output of 1300 lumens from the Cree XHP35 cool white.

** This torch requires an unprotected flat top IMR 18650 Li-ion rechargeable battery that measures between 65 and 65.2 mm. Please note, a battery is not included **

The flashlight offers a huge range of settings for a variety of applications. The SC63 has three main brightness levels plus a beacon-strobe mode. Each main level can be programmed to one of two sub levels. The second sub level can then be further programmed to different brightness levels.

To access the main levels press and hold to cycle through and released at the desired brightness. Double click to select between the two sub levels for the chosen main level. To programme the second sub level, double click 6 times at the main level to start the configuration.

Brightness Levels:
High: H1 1300 lumens - 2.2 hrs runtime or H2 670 lumens - 2.8 hrs runtime / 360 lumens - 4.3 hrs runtime / 160 lumens - 12 hrs runtime
Medium: M1 70 lumens - 33 hrs runtime or M2 32 lumens - 73 hrs runtime / 12 lumens - 8 days runtime
Low: L1 3.8 lumens - 18 days runtime or L2 0.43 lumens - 2.8 months / 0.06 lumens - 5.1 months runtime / 0.01 lumens - 7.1 months runtime

Plus Beacon Strobe Mode: 0.2 Hz Beacon at Low / 0.2 Hz Beacon at H1 / 4 Hz Strobe at H1 / 19 Hz Strobe at H1

Waterproof to IPX-7.

spare o-rings

  • 80º Spot
  • 12º Hot Spot
  • Nominal CCT: 5700K
  • Head Diameter: 0.96 inches / 24.5 mm
  • Length: 3.64 inches / 92.5 mm
  • Weight: 1.3 oz / 38 g (excluding battery)
  • Operating Voltage Range: 2.7V - 6.0V
  • Built-in battery discharging protections with continuously monitored temperature, current, and voltage, plus a (2.7V) low voltage cutoff
  • Battery capacity indicator
  • Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
  • Durable electronic soft-touch switch
  • Smart user interface
  • Precision machined unibody casing from premium grade  aluminum bar stocks
  • Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
  • Durable natural hard anodized finish (Type III Class I)
  • Sealed and potted LED driver circuitry
  • Tempered optical grade glass
  • Orange peel textured reflector
  • Battery reverse polarity protection
  • Pre-installed pocket clip
There are currently no customer reviews of this product.

You may also like

in stock