Fenix FD30

Code: 6942870304571
rating rating rating rating rating Rated 5 / 5 (1 review)

Maximum output 900 lumens. Powered by 1 x 18650 or 2 x CR123 batteries.

The Fenix FD30 focusable torch has a maximum output of 900 lumens from the Cree XP-L HI LED and can be powered by 1 x 18650 Li-ion battery (recommended for best runtimes) or 2 x single use CR123 cells.

For a limited time only, the FD30 is being supplied with a free micro USB rechargeable 18650 battery! The included cell is a Fenix ARB-L18-2600U and has a built-in micro USB port to remove the requirement for a separate external charger.

The latest addition to the focusable series from Fenix, the FD30 offers a 360º rotary focus, operated by a focusing ring on the head of the torch. Turning the focusing ring allows the beam to be changed between spotlight and floodlight. Featuring a dual reflector optical system, the FD30 has an inner and outer reflector. By rotating the focusing ring 360º, the head and the reflector move forwards and backward from the LED, thus regulating the focus between spotlight and floodlight and resulting in a smooth beam pattern.

The FD30 has a tactical forward click tail switch which operates momentary or constant activation and a stainless steel side switch which cycles through the five brightness levels and strobe mode.

Compact and lightweight, the FD30 measured just over 140 mm and has a head diameter of 25.4mm, making it compatible with a range of filters and diffusers. Small enough to fit into a pocket this light is a great choice for every day carry.

Brightness Levels and Runtimes:
Using 1 x 18650 Li-ion Battery
Turbo: 900 lumens - 2 hours runtime
High: 350 lumens - 4 hours 30 minutes runtime
Mid: 150 lumens - 11 hours runtime
Low: 50 lumens - 40 hrs 30 minutes runtime
Eco: 8 lumens - 170 hours runtime

Plus Strobe mode (900 lumens).

Maximum beam distance 200 meters, water resistant to IP68 and resistant to impacts up to 1 meter.


  • Click the tail switch to turn the light on and off, or tap and hold momentary on.
  • When on, single click the functional side switch to cycle through the outputs, in order Turbo-Eco-Low-Mid-High.
  • When on, press and hold the functional side switch for 0.5 seconds to activate Strobe.
  • Rotate the focusing ring to regulate the dual reflector, changing between spot and floodlight.

Included Accessories: Lanyard, belt holster, spare o-ring, spare rubber boot switch, body clip, 2 x single use CR123A batteries.

  • Length: 140.5 mm
  • Body Diameter: 23 mm
  • Head Diameter: 25.4 mm
  • Weight: 96 g (excluding batteries)
  • Dual reflector optical system
  • Spot beam angle of spotlight: 7º
  • Spill beam angle of floodlight: 76º
  • Digitally regulated output maintains constant brightness
  • Reverse polarity protection 
  • Intelligent overheat protection
  • Tactical tail switch
  • Functional side switch
  • Made of durable aircraft-grade aluminium
  • Premium type III hard anodised anti-abrasive finish
RATING: StarStarStarStarStar
(5 / 5 Stars)
Great product. The casing for the battery can be a bit tight though. The first 18650 battery i bought did not fit. (Not bought from this store) I purchased an original Fenix and everything works as advertised.

You may also like


Sorry this item is out of stock.