Free UK Recorded Delivery

Zebralight SC600W

The Zebralight SC600W features a Cree XM-L Neutral White (Nominal CCT 4200K) for improved colour rendition.

Powered by a single 18650 battery, the SC600 is small enough to fit into a pocket yet out performs lights several times bigger.

Three user selectable modes (High, Medium and Low). Each mode can be configured to one of the two sub-levels:

High: H1 430Lm with 645Lm turbo in the first 5 min (2hrs) or H2 172Lm (5.9hrs) / 284Lm (3hrs) / 430Lm (2.1hrs) / 4Hz Strobe
Medium: M1 56Lm (18hrs) or M2 18Lm (50hrs)
Low: L1 2.4Lm (280hrs) or L2 0.09Lm (80days)

Please note - this light does not include a battery.

In Stock Now: £79.95 Including free UK delivery

Zebralight SC600W

Zebralight SC600W Specifications

LED: Cree XM-L Neutral White (Nominal CCT 4200K)
User Selectable Levels: 3 main level (High, Medium and Low). Each main level can be configured to one of its two sub-levels. The second sub-level of the High (H2) can be further configured to different brightness levels or strobes.
High: H1 430Lm with 645Lm turbo in the first 5 min (2hrs) or H2 172Lm (5.9hrs) / 284Lm (3hrs) / 430Lm (2.1hrs) / 4Hz Strobe
Medium: M1 56Lm (18hrs) or M2 18Lm (50hrs)
Low: L1 2.4Lm (280hrs) or L2 0.09Lm (80days
Runtimes are tested using Panasonic NCR18650 (2900mAH) batteries. Light output are out the front (OTF) values. All levels are current regulated.
Operating Voltage Range: 2.7V - 4.2V
Battery: One 18650 size (up to 67mm long) 3.6/3.7V Li-ion rechargeable battery. Batteries are not included in the package.
Parasitic Drain: Negligible (equivalent to 13 years)
Beam Type: 80 degree spill 10 degree hot spot
Dimensions:
Bezel Diameter: 30mm
Body Diameter: 25.4mm
Length: 107mm
Weight 2.95 oz(87.2 g) without battery
Lanyard ring
Step regulation: High steps down to the user selected Med or Med steps down to the user selected Low when battery capacity (not necessary the voltage) is low
Built in over-discharging protection with 2.7V cutoff
Side click electronic soft-touch switch
Smart user interface provides fast and easy access to all brightness levels
Precision machined uni-body casing from premium grade Alcoa aluminum bar stock
Proprietary heat sinking design bonds the LED board directly to the uni-body aluminum casing, providing unblocked thermal paths to most of the surface area.
Durable natural hard anodized finish (Type III Class I)
Ultra clear lens with anti-reflection coatings on both sides
Orange peel textured reflector
Battery power can be locked out by slightly unscrewing the tail cap
to prevent unwanted activations or parasitic drain
Waterproof to IPX8 (2 meters, 30 minutes)

SC600W Cree XM-L

Operation

This light has 3 main levels (High, Medium, and Low). Each main level can be configured to one of its two sub-levels. The second sub-level of the High can be further configured to different brightness levels or strobes.

Basic Operation

Short click turns on the light to High or turns off the light.
Long click (press and hold for about 0.6 seconds) turns on the light to Low.

Advanced Operation and Configuration

Short click turns on the light to High. Short click again quickly to cycle from High to Medium, and Low.
Press and hold to cycle from Low to High, release to set. When press and hold, the light always cycle from Low to High regardless which level you are currently in.
Double click to toggle and select between the two sub-levels for that main level. Sub-level selections (except the strobe) for the 3 main levels are memorized after the light is turned off and through battery changes.
The second sub-level of the High can be configured after 6 double clicks. Double click (starting with the 7th) to cycle and select different brightness levels or strobes. Short click to turn off the light when finishing configurations. The selections for the second sub-level of the High are memorized after the light is turned off and through battery changes

[ Home ] [ Ordering ] [ View Basket ] [ Checkout ] [ Contact Us ]