Home
Secure Checkout
 
  home contact_us Information

Free UK Recorded Delivery

 
Fenix HP11
Fenix HP20
Fenix HL20
Fenix MC10
Fenix TK11 R5
Fenix TK12 R5
Fenix TK15
Fenix TK21
Fenix TK30
Fenix TK35
Fenix TK40
Fenix TK41
Fenix TK45
Fenix TK50
Fenix TK60
Fenix TK70
Fenix LD01
Fenix LD05
Fenix LD10 R5
Fenix LD12
Fenix LD15
Fenix LD20 R4
Fenix LD22
Fenix LD25
Fenix LD40
Fenix PD10
Fenix PD20 R2
Fenix PD22
Fenix PD30 R4
Fenix PD32
Fenix E01
Fenix E05
Fenix E11
Fenix E15
Fenix E21
batteries
ACCESSORIES
bike light
camping-lanterns
maxpedition
zebralight

Copyright 2008

Zebralight SC600

The Zebralight SC600 is an ultra-compact flashlight with an amazing output of 750 lumens. This is the updated version (released October 10th 2011) with lanyard ring, step regulation and reduced parasitic drain.

Powered by a single 18650 battery, the SC600 is small enough to fit into a pocket yet out performs lights several times bigger.

Three user selectable modes (High, Medium and Low). Each mode can be configured to one of the two sub-levels:

  • High: 500Lm with 750Lm turbo in the first 5 min (2hrs) or 200Lm (5.9hrs) / 330Lm (3hrs) / 500Lm (2.1hrs) / 4Hz Strobe
  • Medium: 65Lm (18hrs) or 21Lm (50hrs)
  • Low: 2.8Lm (280hrs) or 0.1Lm (80days)

Powered by a single 18650 battery. Includes removable pocket clip.

Please note - this light does not include a battery.

In Stock Now: £79.95 Including free UK delivery

Zebralight SC600

Zebralight SC600 Specifications

  • LED: Cree XM-L Cool White (Nominal CCT 6300K)
  • User Selectable Levels: 3 main level (High, Medium and Low). Each main level can be configured to one of its two sub-levels. The second sub-level of the High (H2) can be further configured to different brightness levels or strobes.
  • Light Output
  • High: H1 500Lm with 750Lm turbo in the first 5 min (2hrs) or H2 200Lm (5.9hrs) / 330Lm (3hrs) / 500Lm (2.1hrs) / 4Hz Strobe
  • Medium: M1 65Lm (18hrs) or M2 21Lm (50hrs)
  • Low: L1 2.8Lm (280hrs) or L2 0.1Lm (80days)
  • Runtimes are tested using Panasonic NCR18650 (2900mAH) batteries. Light output are out the front (OTF) values. All levels are current regulated.
  • Operating Voltage Range: 2.7V - 4.2V
  • Battery: One 18650 size (up to 67mm long) 3.6/3.7V Li-ion rechargeable battery. Batteries are not included in the package.
  • Parasitic Drain: Negligible (equivalent to 13 years)
  • Beam Type 80 degree spill 10 degree hot spot
  • Bezel Diameter: 30mm
  • Body Diameter: 25.4mm
  • Length: 107mm
  • Weight 2.95 oz(87.2 g) without battery
  • Lanyard ring
  • Step regulation: High steps down to the user selected Med or Med steps down to the user selected Low when battery capacity (not necessary the voltage) is low
  • Built in over-discharging protection with 2.7V cutoff
  • Side click electronic soft-touch switch
  • Smart user interface provides fast and easy access to all brightness levels
  • Precision machined uni-body casing from premium grade Alcoa aluminum bar stock
  • Proprietary heat sinking design bonds the LED board directly to the uni-body aluminum casing, providing unblocked thermal paths to most of the surface area.
  • Durable natural hard anodized finish (Type III Class I)
  • Ultra clear lens with anti-reflection coatings on both sides
  • Orange peel textured reflector
  • Battery power can be locked out by slightly unscrewing the tail cap to prevent unwanted activations or parasitic drain
  • Waterproof to IPX8 (2 meters, 30 minutes)

SC600 Cree XM-L

Operation

This light has 3 main levels (High, Medium, and Low). Each main level can be configured to one of its two sub-levels. The second sub-level of the High can be further configured to different brightness levels or strobes.

Basic Operation

  • Short click turns on the light to High or turns off the light.
  • Long click (press and hold for about 0.6 seconds) turns on the light to Low.

Advanced Operation and Configuration

  • Short click turns on the light to High. Short click again quickly to cycle from High to Medium, and Low.
  • Press and hold to cycle from Low to High, release to set. When press and hold, the light always cycle from Low to High regardless which level you are currently in.
  • Double click to toggle and select between the two sub-levels for that main level. Sub-level selections (except the strobe) for the 3 main levels are memorized after the light is turned off and through battery changes.
  • The second sub-level of the High can be configured after 6 double clicks. Double click (starting with the 7th) to cycle and select different brightness levels or strobes. Short click to turn off the light when finishing configurations. The selections for the second sub-level of the High are memorized after the light is turned off and through battery changes

 

Home ] [ Ordering ] [ View Basket  ] [ Checkout ] [ Contact Us ]





same_day_dispatch