 |
|
 |
 |
Free UK Recorded Delivery & Free Batteries with Every Torch
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
|
 |
|
 |
 |
 |
|
 |
 |
Zebralight H51W
The Zebralight H51 Head Torch features a Cree XP-G neutral white (colour temperature 4200k) LED inside a wide angle reflector.
Can be used as a head torch with the supplied adjustable headband, clipped to clothing / equipment or used tail standing.
Three user selectable modes (High, Medium and Low). Each mode can be configured to one of the two sub-levels:
- High: 172 Lumens (0.9 hrs) or 86 Lumens (2.4 hrs) or 120 Lm (1.7 hrs) / 4Hz Strobe
- Medium: 26 Lumens (9 hrs) or 7 Lumens (30 hrs)
- Low: 2.2 Lumens (3 days) or 0.18 Lumens (16 days)
Powered by a single AA battery. Includes headband and pocket clip.
In Stock Now: £54.95 Including free UK delivery
Zebralight H51W Specifications
- LED: Cree XP-G Neutral White (color temperature 4200K)
- User Selectable Levels: 3 main level (High, Medium and Low). Each main level can be configured to one of its two sub-levels. The second sub-level of the High can be further configured to different brightness levels or strobes.
- High: H1 172 Lm (0.9 hrs) or H2 86 Lm (2.4 hrs) / 120 Lm (1.7 hrs) / 4Hz Strobe
- Medium: M1 26 Lm (9 hrs) or M2 7 Lm (30 hrs)
- Low: L1 2.2 Lm (3 days) or L2 0.18 Lm (16 days)
- Light output are out the front (OTF) values. Runtime tests are done using Sanyo 2000mAh Eneloop AA batteries. The 172, 120, 26, 7 and 2.2 Lumen output levels are current regulated. The 86 and 0.18 Lumen output levels are PWM generated.
- Operating Voltage Range: 0.7V - 2.5V
- Battery: One 1.5V AA (NiMH, lithium or alkaline). 14500 Li-ion batteries are not supported. Batteries are not included in the package.
- Parasitic Drain: Negligible (equivalent to 16 years)
- Beam Type 80 degree spill beam spread 11 degree (3.8 feet at 20 feet) hot spot
- Diameter: 0.90 inch (23 mm)
- Length: 3.2 inch (81 mm)
- Weight 1.2 oz (35.8 gram)
- 2.2 oz (61.9 gram) with an Eneloop AA
- 3 .0 oz (84.9 gram) with an Eneloop AA and headband
- Electronic soft-touch switch, with a 200,000 cycle operating life
- Smart user interface provides fast and easy access to all brightness levels
- Precision machined uni-body casing from premium grade Alcoa aluminum bar stock
- Proprietary heat sinking design bonds the LED board directly to the uni-body aluminum casing, providing unblocked thermal paths to over 94% of the surface area.
- Durable natural hard anodized finish (Type III Class I)
- Ultra clear lens with anti-reflection coatings on both sides
- Orange peel textured reflector
- Battery power can be locked out by slightly unscrewing the tail cap to prevent unwanted activations or parasitic drain
- Waterproof to IPX8 (2 meters, 30 minutes)
Operation
From Off
- Short click turns on the light to High (H2) instantly. Click again quickly to cycle from High to Medium, and Low.
- Press and hold to cycle through Low, Medium and High, release to set.
When On
- Short click turns off the light.
- Press and hold to cycle from Low to High, release to set. The light always cycle from Low to High regardless which level you are currently in.
- Double click at any level to toggle and select between the two sub-levels for that level. Medium and Low selections are memorized after the light is turned off and through battery changes. H1 is not memorized.
[ Home ] [ Ordering ] [ View Basket ] [ Checkout ] [ Contact Us ] |
|
|
|
|
|
